Import of the watch repository from Pebble

third_party/jerryscript/targets/mbed/Makefile.mbed

@@ -0,0 +1,98 @@
+# Copyright 2015-2016 Samsung Electronics Co., Ltd.
+# Copyright 2016 University of Szeged.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# use TAB-8
+
+TARGET_LIST     = k64f stm32f4 stm32f429i nucleo
+JERRYHEAP      ?= 16
+
+ifneq ($(filter $(board), $(TARGET_LIST)),)
+	TARGET        = $(board)
+ifeq ($(TARGET), k64f)
+	YOTTA_TARGET  = frdm-k64f-gcc
+	TARGET_DIR   ?= /media/$(USER)/MBED
+else ifeq ($(TARGET), stm32f4)
+	YOTTA_TARGET  = stm32f4-disco-gcc
+else ifeq ($(TARGET), stm32f429i)
+	YOTTA_TARGET  = stm32f429i-disco-gcc
+else ifeq ($(TARGET), nucleo)
+	YOTTA_TARGET  = st-nucleo-f401re-gcc
+	TARGET_DIR   ?= /media/$(USER)/NODE_F401RE
+endif
+
+BUILD_DIR	?= build/mbed
+UPPERC_TARGET	?= $(shell echo $(TARGET) | tr a-z A-Z)
+COPYTARGET	?= targets/mbed/libjerry
+
+else
+  $(error This board ($(board)) is not supported!)
+endif
+
+EXT_CFLAGS := -D__TARGET_MBED_$(UPPERC_TARGET)
+EXT_CFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m4
+EXT_CFLAGS += -Wno-error=format=
+
+EXT_PORT_DIR := ""
+
+.PHONY: jerry js2c yotta flash clean
+
+all: jerry js2c yotta
+
+jerry:
+	mkdir -p $(COPYTARGET)
+	mkdir -p $(BUILD_DIR)
+	cmake -B$(BUILD_DIR) -H./ \
+	 -DENABLE_LTO=OFF \
+	 -DFEATURE_VALGRIND=OFF \
+	 -DCMAKE_TOOLCHAIN_FILE=cmake/toolchain_external.cmake \
+	 -DJERRY_LIBC=OFF \
+	 -DJERRY_CMDLINE=OFF \
+	 -DENABLE_ALL_IN_ONE=OFF \
+	 -DEXTERNAL_CMAKE_SYSTEM_PROCESSOR=armv7l-hf \
+	 -DEXTERNAL_CMAKE_C_COMPILER=arm-none-eabi-gcc \
+	 -DEXTERNAL_CMAKE_C_COMPILER_ID=GNU \
+	 -DEXTERNAL_COMPILE_FLAGS="$(EXT_CFLAGS)" \
+	 -DMEM_HEAP_SIZE_KB=$(JERRYHEAP) \
+
+	make -C$(BUILD_DIR) jerry-core
+	make -C$(BUILD_DIR) jerry-libm
+	cp $(BUILD_DIR)/lib/libjerry-core.a $(COPYTARGET)/libjerrycore.a
+	cp $(BUILD_DIR)/lib/libjerry-libm.a $(COPYTARGET)/libjerrylibm.a
+
+js2c:
+	cd targets/mbed; ../tools/js2c.py;
+
+yotta:
+	cd targets/mbed; \
+	 yotta target $(YOTTA_TARGET); \
+	 yotta build
+
+flash:
+  ifndef TARGET_DIR
+	st-flash write targets/mbed/build/$(YOTTA_TARGET)/source/jerry.bin 0x08000000
+  else
+	  @if [ ! -d "${TARGET_DIR}" ] ; then \
+	   echo "The board not mounted at ${TARGET_DIR}"; \
+	   exit 1; \
+	  fi
+	  cp targets/mbed/build/$(YOTTA_TARGET)/source/jerry.bin \
+	   "$(TARGET_DIR)/."
+  endif
+	@echo "Wait till LED flashing stops..."
+
+clean:
+	rm -rf $(COPYTARGET)
+	rm -rf $(OUTPUT)
+	rm -rf targets/mbed/build